Residential · Albuquerque, NM
Stucco siding has to do more than look clean, it has to manage water, heat, and movement year after year. Since 2016, Superior Stucco Albuquerque has installed and repaired stucco siding in Albuquerque with proper lath, flashing, and control joints, not shortcuts.
Prep makes or breaks stucco siding. We start by protecting landscaping and hardscape, then remove loose stucco, failed paint, or damaged trim to reach sound substrate. For repairs, we square up cracks and delamination, correct the cause (missing flashing, no weeps, poor bonding), and rebuild the assembly, not just skim coat the surface. For new installations we verify framing, sheathing, and fastener schedules, then install a water-resistive barrier (Grade D building paper or equivalent), kickout flashing where needed, and weep screed at the base before adding galvanized expanded metal lath with proper overlap and corrosion-resistant fasteners.
Albuquerque’s intense sun, wind-driven rain, and big temperature swings punish weak finish work, so we match the system to the exposure and the wall. Traditional three-coat stucco uses a scratch coat, brown coat, and finish coat with proper curing time to reduce shrinkage cracks, while a one-coat system can be appropriate when installed to manufacturer specs with the correct basecoat thickness. We form control joints and expansion joints to manage movement, and we seal transitions at windows, doors, parapets, and hose bibs with compatible sealant, not caulk-and-hope. Finishes include sand-float, dash, lace, and smooth trowel textures, and we can color-match existing stucco siding or prep for elastomeric coating when the wall is ready.
Property owners choose us because we treat stucco siding as an exterior wall system, not a cosmetic layer. You get clear communication, a written scope, and repairs that address drainage details, flashing, and cracking patterns so the same failure does not return. Our crew works with real-world building conditions like patchy substrates, previous acrylic coatings, mixed materials (stucco to brick, stucco to wood trim), and improperly terminated lath. We are licensed and insured, and we keep the jobsite orderly with dust control, daily cleanup, and careful protection around windows, stucco bands, and hardscapes.
Before we call a stucco siding job complete, we do a walkthrough with you and document what was repaired or installed, including where we added weep screed, flashing corrections, and control joints. You receive a clean finish with straight lines at trims and corners, consistent texture, and a plan for maintenance such as sealant checks and repaint timing. We can coordinate related items like replacing rotted wood, adjusting downspouts, or reworking stucco-to-roof transitions so water sheds correctly. If you want to compare options, we provide a free written estimate that breaks out repair areas, finish texture, and any recommended upgrades.
Yes. We provide a free written estimate with a clear scope, recommended materials, and the expected finish and texture.
Yes. We are licensed and insured for stucco work, and we can confirm coverage details during scheduling.
Small patches can take a day plus return trips for finish and paint or coating. Re-stucco schedules vary by wall area, access, prep, and curing time, we will give a realistic timeline in the estimate.
Yes. We handle residential stucco repairs and full installs, plus commercial façade repairs, coating projects, and maintenance work for property managers.
We aim for a close match, but sun fade and previous coatings can affect perfect color matching. When needed, we recommend blending or coating larger sections for a uniform appearance.
Stucco siding is one of the most durable exterior claddings for New Mexico properties when it is built as a complete system, water control layer, lath, base coats, and finish. Many siding failures we see are not “bad stucco,” they are missing weep screed, poorly integrated flashing, no control joints, or repairs done with the wrong materials. Superior Stucco Albuquerque installs and repairs stucco siding using proven methods that improve drainage, reduce cracking, and keep walls looking consistent.
For installation, we confirm the substrate is sound and flat, then install a water-resistive barrier and metal lath with correct overlaps and fastening. From there we apply scratch and brown coats (or a manufacturer-approved one-coat base), keeping thickness and curing time in mind so the stucco siding stays stable. Corners, trim returns, and architectural bands are formed cleanly, and we detail drainage and sealant transitions where water typically gets behind siding.
For repair, we focus on diagnosing the cause before patching. Common issues include hairline and step cracks, bulges from delamination, water staining at openings, and soft areas near grade from missing weeps or splashback. Repairs may include removing compromised sections, replacing lath, adding flashing or control joints, then rebuilding and blending texture so the patch does not telegraph through the finish.
If you are comparing contractors for stucco siding in Albuquerque, ask how they handle weep screed, flashing tie-ins, joint layout, and curing time. Those details are what separate a quick patch from a lasting fix. Contact Superior Stucco Albuquerque for a free written estimate and a clear plan for your siding.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Albuquerque. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
